Avaya S8800 Installing page 22

For avaya aura collaboration server
Hide thumbs Also See for S8800:
Table of Contents

Advertisement

Installing the Avaya S8800 Server
2. Install the L-shaped cable-management stop bracket (3) on the unattached end of
3. Turn the bracket (4) to secure it to the support arm. See the preceding figure.
4. To attach the other side of the support arm to the backside of the slide rail, pull
22
Installing the Avaya S8800 Server for Avaya Aura
the support arm. See the following figure
the pin out (5), and then slide the bracket (6) into the slide rail. See the following
figure.
Collaboration Server
®
December 2010

Advertisement

Table of Contents
loading

Table of Contents