Server Specifications - Avaya S8800 Installing

Overview of the Avaya S8800 Server
17 Power LED (green)
18 Ethernet connector 2 (eth 1) (services port)
19 Ethernet connector 1 (eth 0) (Corporate LAN / processor Ethernet)
20 Ethernet connectors 4 (eth 3)
21 Ethernet connectors 3 (eth 2)
22 System management Ethernet connector (IMM)
Note:
Hardware label for Ethernet ports on the server is called Ethernet connectors.
Communication Manager software refers to Ethernet ports as eth.

Server specifications

Type
Dimensions
Weight
Heat output
Acoustic noise
emissions
Electrical input
requirements
10 Installing the Avaya S8800 Server for Avaya Aura
Height: 43 mm (1.69 inches, 1U)
Depth: 711 mm (28 inches)
Width: 440 mm (17.3 inches)
Maximum weight: 15.4 kg (34 lb.) when fully configured.
Approximate heat output:
• Minimum configuration: 662 Btu per hour (194 watts)
• Maximum configuration: 1400 Btu per hour (400 watts)
Heat output varies depending on the number and type of optional
features that are installed and the power-management optional
features that are in use.
Declared sound power, operating: 6.1 bel
The sound levels were measured in controlled acoustical
environments according to the procedures specified by the American
National Standards Institute (ANSI) S12.10 and ISO 7779 and are
reported in accordance with ISO 9296. Actual sound-pressure levels
in a given location might exceed the average values stated because
of room reflections and other nearby noise sources. The declared
sound-power levels indicate an upper limit, below which a large
number of computers will operate.
• Sine-wave input (47–63 Hz) required
• Input voltage low range:
- Minimum: 100 V AC
Collaboration Server
®
Description
December 2010