Avaya-Provided Equipment; Customer-Provided Equipment - Avaya S8800 Installing

Installing the Avaya S8800 Server
• Do not overload the AC supply branch circuit that provides power to the rack. The total
rack load should not exceed 80 percent of the branch circuit rating.
• Ensure that proper airflow is provided to components in the rack:
• Do not step on or stand on any component when servicing other components in a rack.
• Do not place any object on top of rack-mounted components.

Avaya-provided equipment

Avaya provides the following equipment:
• Server and power cord or cords
• Slide rails
• Cable management arm assembly
• Cable management arm stop bracket
• Cable management arm mounting bracket
• Cable management support arm
• Two 10–32 screws
• Four M6 screws
• Five small cable ties
• One large cable tie
• Compact flash reader, USB cable, and flashcard (for backing up files. Included when
required by the product ordered.)
• Modem and USB or serial cable (for remote maintenance. Included when required by the
product ordered.)
• Other hardware as ordered, such as uninterruptible power source (UPS).

Customer-provided equipment

The customer must provide the following equipment:
14 Installing the Avaya S8800 Server for Avaya Aura
- Do not block any air vents. Usually 15 cm (6 in.) of space provides proper airflow.
- Install the server only in a rack cabinet with perforated doors.
- Do not leave open spaces above or below an installed server in your rack cabinet.
To help prevent damage to server components, always install a blank filler panel to
cover the open space and to help ensure proper air circulation.
Collaboration Server
®
December 2010