Dekolink Deko2119 Product Manual page 51

D W L
EKOLINK IRELESS TD
8.5.4.1 Temperature Warning
Most probable cause: Unit temperature becomes high. .
Corrective action: Check the Repeater case for external causes (sun, hot
environment, air flow is blocked). Eliminate the reason for excessive heat.
8.5.4.2 Temperature Shutdown
Most probable cause: Unit temperature is too high. Mini-Repeater ceases
operation.
Corrective action: Check the Repeater case for external causes (sun, hot
environment, air flow is blocked). Eliminate the reason for excessive heat.
Let the unit cool, forced air cooling is possible.
8.5.4.3 System Mute
Most probable cause: Mini-Repeater amplification is muted
(automatically). .
Corrective action: Check the LEDs in the Mini-Repeater. See paragraph
8.4.
8.5.4.4 User Mute
Most probable cause: Mini-Repeater amplification is muted (manually). .
Corrective action: This is the result of an operator action. Check RF
Transmission box in Link area in the Controls and Parameters pane. The
box should be empty. Click on it to change the LED status.
Check first the reason for the suppression of the function.
Check that the Mini-Repeater is not checked out in the
Check the LEDs in the Mini-Repeater. See paragraph 8.4.
8.5.4.5 Panel Switch Mask
Most probable cause: Mini-Repeater front panel LEDs are disabled.
Corrective action: This is not a malfunction. Check the reason for the
action.
Pub. 313-2006 Rev. 2.01S
. M -R
INI EPEATER
CAUTION
Do not cool with water
CAUTION
Do not cool with water
CAUTION
Proprietary Data
D 2119
EKO
field.
P M
RODUCT ANUAL
Page 43