Configuration Screen - Dekolink Deko2119 Product Manual

P M
RODUCT ANUAL
7.10 C
ONFIGURATION
The RMS650 software provides the current configuration of the Mini-Repeater
by clicking on the Configuration tab. The data are downloaded to the RMS
software when you press the Get Parameters button, in any screen.
The comprehensive fields in this screen provide the full identification of the
Mini-Repeater, and of its major components such as software versions and
serial numbers of hardware items. These data are stored in the Mini-Repeater
at the manufacturing process, and cannot be changed by the operator. They are
provided for information only. It provides you the necessary identification data
whenever you report on the repeater operation or during the repair process.
Figure 26: RMS Software – Configuration Screen
Page 36
M -R
INI EPEATER
S
CREEN
Proprietary Data
D 2119 D
EKO EKOLINK
Pub. 313-2006 Rev. 2.01S
W L .
IRELESS TD