Selecting The Operating Sub-Bands - Dekolink Deko2119 Product Manual

P M
RODUCT ANUAL
7.7 S
ELECTING THE
The next step in the operation procedures consist of setting the Mini-Repeater
bandwidth within its frequency range. These procedures are performed in the
Channeler area in the lower part of the Controls and Parameters screen, as
shown below.
7.7.1 Channeler Area - Main Fields and Tools
The main fields and tools in the Channeler area are provided in Figure 20.
Figure 20: Channeler Sub-Screen – Main Fields and Tools
Page 30
M -R
INI EPEATER
O S -B
PERATING UB
Proprietary Data
D 2119 D
EKO
ANDS
Pub. 313-2006 Rev. 2.01S
W L .
EKOLINK IRELESS TD