Advertisement

Quick Links

WARNING HYDRAULIC POST DRIVER
Any piece of equipment can be dangerous if not operated properly. YOU are responsible for the safe operation
of this equipment. The operator must carefully read and follow any warnings, safety signs and instructions
provided with or located on the equipment. Do not remove, defeat, deface or render inoperable any of the safety
devices or warnings on this equipment. IF any safety devices or warnings have been removed, defeated,
defaced or rendered inoperable, DO NOT USE THIS EQUIPMENT!!!
IMPORTANT SAFETY RULES TO FOLLOW.
Post this Safety and operating instruction at work locations, provide copies to employees, and make sure that
everyone reads the Safety and operating instruction before operating or servicing the machine.
In addition, the operator or the operator's employer must assess the specific risks that may be present as a result
of each use of the machine.
Safety signal words: The safety signal words Danger, Warning and Caution have the following meanings:
DANGER: Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
WARNING: Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
CAUTION: Personal precautions and qualifications only qualified and trained persons may operate or maintain
the machine. They must be physically able to handle the bulk, weight, and power of the tool. Always use your
common sense and good judgment.
PERSONAL PROTECTIVE EQUIPMENT
Always use approved protective equipment. Operators and all other persons in the working area must wear
protective equipment, including at a minimum: Protective helmet, Hearing protection, Impact resistant eye
protection with side protection, Respiratory protection when appropriate, Protective gloves, Proper
protective boots, Appropriate work overall or similar clothing (not loose-fitting) that covers your arms
and legs.
WARNING Drugs, alcohol or medication Drugs, alcohol or medication may impair your judgment and powers
of concentration. Poor reactions and incorrect assessments can lead to severe accidents or death.
► Never use the machine when you are tired or under the influence of drugs, alcohol or medication.
► No person who is under the influence of drugs, alcohol or medication may operate the machine.
WARNING Hydraulic oil at high pressure Thin jets of hydraulic oil under high pressure can penetrate the skin
and cause permanent injury. Immediately consult a doctor if hydraulic oil has penetrated the skin. Never use
your fingers to check for hydraulic fluid leaks. Keep your face away from any possible leaks.
WARNING Hydraulic oil Spilled hydraulic oil can cause burns, accidents due to slippery conditions and will
also harm the environment. Take care of all spilled oil and handle it according to your safety and environmental
regulations. Never dismount the hydraulic machine when the hydraulic oil is hot.
CAUTION Skin eczema Hydraulic oil can cause eczema if it comes in contact with the skin. Avoid getting
hydraulic oil on your hands. Always use protective gloves when working with hydraulic oil. Wash hands after
contact with hydraulic oil.
CAUTION Moving parts Risk for crushed hands and fingers. Never check bores or passages with hands or
fingers. Never operate the machine when adjusting the choke control or fuel valve.
WARNING Whipping hydraulic hose Hydraulic hoses under pressure can whip uncontrollably if screws
loosen or are loosened. A whipping hydraulic hose can cause severe injuries. Depressurize the hydraulic system
before loosening the connection of a hydraulic hose. Tighten the nuts on the connections of the hydraulic hoses
to the required torque. Check that the hydraulic hose and the connections are not damaged
.
If the person receiving this handout will not be the user of the equipment, forward these instructions to the
operator. IF there is any doubt as to the operation or safety of the equipment, DO NOT USE!!! CALL A
TOOL SHED IMMEDIATELY!!! FAILURE TO FOLLOW THESE INSTRUCTIONS COULD
RESULT IN INJURY OR DEATH

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PDR 30 T and is the answer not in the manual?

Questions and answers

Summary of Contents for Atlas Copco PDR 30 T

  • Page 1 WARNING HYDRAULIC POST DRIVER Any piece of equipment can be dangerous if not operated properly. YOU are responsible for the safe operation of this equipment. The operator must carefully read and follow any warnings, safety signs and instructions provided with or located on the equipment. Do not remove, defeat, deface or render inoperable any of the safety devices or warnings on this equipment.
  • Page 2: Operation Precautions

    PDR 30 T Safety and operating instructions WARNING Hydraulic oil WARNING Unexpected movements Spilled hydraulic oil can cause burns, accidents due The post is exposed to heavy strains when the to slippery conditions and will also harm the machine is used. If the post breaks or gets stuck, environment.
  • Page 3 Safety and operating instructions PDR 30 T ► Select, maintain and replace consumables/ WARNING Dust and fume hazard inserted tools/ other accessory as recommended Dusts and/or fumes generated or dispersed when in the operating and safety instructions. Incorrect using the machine may cause serious and permanent...
  • Page 4 PDR 30 T Safety and operating instructions WARNING Slipping, tripping and WARNING Vibration hazards falling hazards Normal and proper use of the machine exposes the There is a risk of slipping or tripping or falling, for operator to vibration. Regular and frequent exposure example tripping on the hoses or on other objects.
  • Page 5: Maintenance Precautions

    Safety and operating instructions PDR 30 T See the ”Noise and vibration declaration statement” Maintenance, precautions for the machine, including the declared vibration values. This information can be found at the end of WARNING Machine modification these Safety and operating instructions.
  • Page 6: Design And Function

    Other diameters require the use of adaptors. To choose the correct adaptor, see the spare parts list. PDR 30 T post driver can be equipped with a built-in control valve. PDR 30 T is intended for use on an open centre hydraulic system.
  • Page 7: Quick-Release Couplings

    Safety and operating instructions PDR 30 T The label indicates the guaranteed noise level Hoses corresponding to EC-directive 2000/14/EC. See "Technical data" for accurate noise level. For connection on the machine, the hydraulic hose Accumulator must be approved for a working pressure of at least 172 bar (2,500 psi) and have a 12.7 mm (½...
  • Page 8: Pressure Adjustment

    PDR 30 T Safety and operating instructions Optional adaptors Pressure adjustment Round adaptor: maximum Ø16 The maximum pressure of the power source is mm (Ø0.63 in.). important. The pressure created in case of an incorrectly or unfitted return line coupling would cause overloading.
  • Page 9: When Taking A Break

    Safety and operating instructions PDR 30 T ♦ Oil supply: If the oil supply of the power source 6. Activate the trigger by pressing the handles exceeds the flow prescribed, the engine's rpm down. When the post driver is within reach, must be reduced, until correct oil flow is achieved.
  • Page 10: Every Month

    PDR 30 T Safety and operating instructions ♦ Before starting maintenance on the machine, Every month clean it in order to avoid exposure to hazardous substances. See “Dust and fume hazards” ♦ Check torque tightness of all fasteners. Use only authorised parts. Any damage or ♦...

Table of Contents