Centrifugal Clutch; Dismantling - Husqvarna 565 Workshop Manual

Centrifugal clutch

12.1 Dismantling

1. Make sure that the chain brake is disengaged.
2. Remove the cylinder cover, bar and chain.
3. Unscrew the bolt and remove the chain guide plate
(A). See figure 1.
4. Remove the locking ring (B) with washer and lift
up the clutch drum (C) with needle bearing (D) and
chain drive sprocket (E). See figure 2.
5. Remove the spark plug and fit the piston stop.
Remove the clutch with the clutch tool. See figure 3.
NOTE! Left-hand thread. Screw in the
direction of the arrow as shown in figure 3.
28 - English
12 Centrifugal clutch
Fig. 1
B
E
D
Fig. 2
Fig. 3
A
C