Mounting The Sunny Central String-Monitor To A Wall - SMA SUNNY CENTRAL STRING-MONITOR US Technical Description

Mounting
4.3.1 Mounting the Sunny Central String-Monitor to a wall
A Mounting bracket
Two mounting rails are attached to the rear side of the
Sunny Central String-Monitor. The mounting rail is
attached to the Sunny Central String-Monitor right and
left with nuts.
1. Loosen the 4 nuts counterclockwise. Remove nuts
and washers, they will be needed later.
2. Lay the 4 mounting brackets on the threads of the
mounting rails.
3. Slide the washers on the threads.
4. Screw the nuts onto the threads and tighten
clockwise with a torque of 89 in-lb (10 Nm).
5. Measure the distance for the holes.
6. Mark the position of the drill holes.
7. Drill holes at the marked positions.
26 SSMUS-TUS094511
SMA Solar Technology AG
Technical Description