Vecow IVH-9204MX ICY User Manual page 111

BOOL SetDIO1Config(BYTE Isolate_Type, BYTE DI_NPN, BYTE DO_NPN,
WORD Mask)
BOOL SetDIO2Config(BYTE Isolate_Type, BYTE DI_NPN, BYTE DO_NPN,
WORD Mask)
Set DIO configuration
Isolate_Type : DIO type
1 : Isolated DIO;
0 : Non-Isolated DIO
DI_NPN ([7:0]): DI type, pin setting by hexadecimal bitmask
1 : PNP (Source) mode for European rule;
0 : NPN (Sink) mode for Japanese rule
DO_NPN : DO type
1 : PNP (Source) mode for European rule;
0 : NPN (Sink) mode for Japanese rule
Mask ([15:0]): In/Out, pin setting by hexadecimal bitmask
1 : Output;
0 : Input
Return :
TRUE (1) : Success;
FALSE (0) : Fail (Initial error, or hardware problem)
BOOL GetDI1(BYTE *DI)
BOOL GetDI2(BYTE *DI)
Get isolated DIO input (DI)
DI ([7:0]) : Input state, pin setting by hexadecimal bitmask
1 : High;
0 : Low
Return :
TRUE (1) : Success;
FALSE (0) : Fail (Initial error, or call by pointer error, or hardware problem)
BOOL GetDO1(BYTE *DO)
BOOL GetDO2(BYTE *DO)
Get isolated DIO output (DO)
DO ([7:0]): Output state, pin setting by hexadecimal bitmask
1 : High;
0 : Low
Return :
TRUE (1) : Success;
FALSE (0) : Fail (Initial error, or call by pointer error, or hardware problem)
©Vecow IVH-9204MX ICY User Manual Appendix B 104