Using Your Mask - ResMed AirFit N10 User Manual


The technical specifications of the mask are provided for your
clinician to check that they are compatible with the CPAP or
bilevel device. If used outside specification or if used with
incompatible devices, the seal and comfort of the mask may not
be effective, optimum therapy may not be achieved, and leak, or
variation in the rate of leak, may affect the CPAP or bilevel device
function.

Discontinue using this mask if you have ANY adverse reaction to
the use of the mask, and consult your physician or sleep therapist.

Using a mask may cause tooth, gum or jaw soreness or aggravate
an existing dental condition. If symptoms occur, consult your
physician or dentist.

As with all masks, some rebreathing may occur at low CPAP
pressures.

Refer to your CPAP or bilevel device manual for details on
settings and operational information.

Remove all packaging before using the mask.

Using your mask

When using your mask with ResMed CPAP or bilevel devices that have
mask setting options, refer to the Technical specifications section in this
user guide for mask selection options.
For a full list of compatible devices for this mask, see the Mask/Device
Compatibility List on www.resmed.com on the Products page under
Service & Support. If you do not have internet access, please contact
your ResMed representative.
Fitting
1. With the grey side of the headgear facing outward and with both
lower headgear straps released, align the bottom of the cushion
opening with the bottom of your nose.
2. Place the mask over your nose. Hold the mask against your face and
pull the headgear over your head.
Headgear check:

Ensure the label on the headgear faces outwards when the
headgear is put on.
3. Bring the lower straps below your ears. Attach the magnet clip to the
outside of the frame.
English 3