Cleaning Your Mask In Your Home; Reprocessing The Mask Between Patients - ResMed AirFit N10 User Manual

Cleaning your mask in your home

Your mask and headgear should only be handwashed by gently rubbing in
warm (approximately 30°C) water using mild soap. All components should
be rinsed well with drinking quality water and allowed to air dry out of
direct sunlight.
WARNING
Always follow cleaning instructions and use mild soap. Some
cleaning products may damage the mask, its parts and their function,
or leave harmful residual vapours that could be inhaled if not rinsed
thoroughly.
CAUTION
If any visible deterioration of a system component is apparent
(cracking, crazing, tears etc), the component should be discarded and
replaced.
Daily/After each use:

To optimise the mask seal, facial oils should be removed from the
cushion after use.

Handwash the separated mask components (excluding headgear and
soft sleeves).

If the vent or swivel requires cleaning, use a soft bristle brush.
Weekly:

Handwash the headgear and soft sleeves. The headgear may be
washed without being disassembled.

Reprocessing the mask between patients

This mask should be reprocessed when used between patients. Cleaning,
disinfection and sterilisation instructions are available from the ResMed
website, www.resmed.com/masks/sterilization. If you do not have
internet access, please contact your ResMed representative.
English 5