Wheel Installation
1. With the transmission in gear and the parking brake locked, place the wheel
in the correct position on the wheel hub. Be sure the valve stem is toward the
outside and rotation arrows on the tire point toward rotation.
2. Attach the wheel nuts and finger tighten them.
3. Lower the vehicle to the ground.
4. Securely tighten the wheel nuts according to the chart found in "15.
MAINTENANCE/Wheel Nut Torque".
Tire Inspection
When replacing a tire always use original equipment size and type.
Tire Tread Depth
Always replace tires when tread depth is worn to 1/8"(3mm)(1) or less. Please
refer to your Owner's Manual for tire specifications.
79