Starting The Engine; Procedure For Starting A Cold Engine - Coleman POWERSPORTS AT125-B Manual

Procedure for Starting a Cold Engine

WARNING
Never run an engine in an enclosed area. Carbon monoxide exhaust gas
is poisonous and can cause severe injury or death. Always start
engines outdoors.
CAUTION
You must allow your vehicle adequate warm up time before operating
or engine damage could result.
1. Place the transmission in neutral and set the parking brake.
2. Turn the fuel tank valve to ON.
3. Sit on the vehicle.
4. Have the engine emergency stop switch lanyard in place
5. Insert the key into the ignition switch, and turn to the "ON" position;
depress the brake lever and press the start button.
6. Do not depress the throttle more than 20％while starting the engine.
7. Activate the starter for a maximum of five seconds, releasing the button
when the vehicle starts. If engine does not start, let the starter rest for 5
seconds then repeat the procedure.
CAUTION
This ATV only equipped with an electric start system. If the battery is
under charged, the ATV will not run.

8. STARTING THE ENGINE

43