Coleman POWERSPORTS AT125-B Manual page 64

1. Set the battery in its holder.
2. First connect and tighten the red (positive) cable.
3. Second connect and tighten the black (negative) cable.
4. Put on the battery plate or battery belt.
5. Verify that cables are properly routed.
NOTE:
·When your ATV is placed in storage for one month or more, the battery
should be removed, charged to proper level, and stored in a cool dry place.
·Before reusing, take the battery to your dealer for testing and recharging.
·When installing a new battery, make certain it is fully charged prior to it is
initial use. Using a new battery that has not been fully charged can damage the
battery resulting in a shorter life of the battery; it can also hinder vehicle
performance.
CAUTION
Your ATV may no be sufficient to provide power for optional equipment.
When installing optional equipment please upgrade your battery as necessary.
See your dealer for the proper battery.
62