Coleman POWERSPORTS AT125-B Manual page 58

CAUTION
If your ATV becomes immersed, take it to your dealer before starting
the engine. Major engine damage can result if the maching is
not thoroughly inspected.
If it is impossible to take it to a dealer before starting, follow these steps
outlined below.
·Move the ATV to dry land or at the very least, to water depth not more than
8 in. (200 mm).
·Turn the fuel valve to "OFF".
·Remove the spark plug.
·Loosen the carburetor drain screw (1).
·Turn the engine over several
times with the electric start.
·Dry the spark plug and reinstall
or replace it with a new plug.
·Tighten the carburetor drain
screw (1).
·Turn the fuel valve to "ON".
·Attempt to start the engine. If necessary, repeat the drying procedure.
·Take the machine to your dealer for service as soon as possible, whether you
succeed in starting it or not.
56