Setting The Parking Brake; Important Safeguards - Coleman POWERSPORTS AT125-B Manual

Setting the Parking Brake

1. Squeeze the right hand brake lever（3） two or three times and hold it.
2. Press down the parking hinge pin (1), place the parking lock into the groove
then release brake lever. The ATV will now be in the parking condition.
3.Pulling back the brake lever, and releasing the parking lock will disengage
the parking brake

Important Safeguards

·The parking brake may relax when left on for a long period of time. This
could cause an accident.
·Do not leave the vehicle on a hill relying on the parking brake for more
than five minutes.
·Always block the downhill side of the wheels if leaving the ATV on a hill.
If the hill is not too steep, park the ATV sideways on the hill.
WARNING
Always check to be sure that the parking brake has been disengaged
before operating the ATV. An accident could result causing severe injury
if the parking brake is left on while the ATV is operated.
38