Making Turns - Coleman POWERSPORTS AT125-B Manual

Making turns

Practice making turns at slow speeds
This ATV is equipped with a solid rear axle which drives both rear wheels
equally at all times. This means that the wheel on the outside of the turn must
travel a greater distance than the inside wheels when turning and the inside tire
must slip traction slightly. To turn, steer in the direction of the turn, leaning
your weight on the outer footrest. This technique alters the balance of traction
between the rear wheels, allowing the turn to be made smoothly. The same
leaning technique should be used for turning in reverse.
WARNING
Avoid turning at sharp angles in reverse as tip over and severe injury
may result.
49