Turning Around On A Hill - Coleman POWERSPORTS AT125-B Manual

Table of Contents

Advertisement

Turning Around on a Hill

If the ATV stalls while climbing a hill, never back it down the hill! One
maneuver which can be used when it is necessary to turn around while
climbing a hill is the K-turn.
1. Stop and lock the parking brake while maintaining body weight uphill.
2. Leave transmission in forward and shut off the engine.
3. Dismount on the left or the uphill side of the ATV.
4. Staying uphill of the ATV, turn handlebars full left (while facing front of
ATV).
5. While holding the service brake, release parking brake lock and slowly
allow the ATV to roll around to your right until the ATV is pointing across the
hill or slightly downward.
6. Lock the parking brake and remount the ATV from the uphill side,
maintaining body weight uphill.
7. Restart engine with transmission still in forward, release parking brake, and
proceed slowly, controlling speed with the service brake, until the ATV is on
reasonably level ground.
WARNING
Avoid climbing steep hills. Loss of vehicle control or overturning of the
ATV could occur resulting in severe injury or death.
54

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents