Registering In Sunny Portal - SMA ennexOS SUNNY PORTAL Operating Manual

SMA Solar Technology AG
• Master and slave configuration
• Meter configuration
• Grid management services
☑ A successful commissioning is confirmed by a message.
7.4 Registering in Sunny Portal
Once you have carried out the commissioning on the user interface of the product, you can make
further system configurations in Sunny Portal. For this, all products of a system must be registered in
Sunny Portal.
Requirements:
☐ The product must be in operation and connected to the local network via an Internet router.
☐ The registration ID (RID), identification key (PIC) and the Internet address of the type label or
of other provided labels must be available.
☐ The system LED must glow green.
☐ An active Internet connection must be established.
Procedure:
1. Call up the Internet address https://ennexOS.SunnyPortal.com in the web browser.
2. Register as a new user in Sunny Portal or log into Sunny Portal as an existing user.
3. Create a new system or add product to an existing system.
Register as a new user in Sunny Portal.
1. Call up the Internet address https://ennexOS.SunnyPortal.com in the web browser.
2. Select I require a user account.
3. Enter the necessary data for registration.
4. Select [Register].
☑ After a few minutes you will receive an e-mail containing a link and your access data to
Sunny Portal.
5. If you have not received an e-mail from Sunny Portal, check whether the e-mail has been
redirected to a folder for junk mail or whether an incorrect e-mail address has been entered.
6. Follow the link in the confirmation e-mail within 48 hours.
☑ Sunny Portal opens a separate window to confirm successful registration.
7. Call up the Internet address https://ennexOS.SunnyPortal.com in the web browser.
8. Enter the e-mail address and the Sunny Portal password in the fields User and Password.
9. Select [Login].
Log in to Sunny Portal as an existing user.
Requirement:
☐ You must have access to a user account in Sunny Portal, Sunny Places or Sunny Design.
Operating manual
7 Commissioning
EDMM-10-BE-en-20 35