Commissioning; Establishing A Direct Connection Via Wlan - SMA ennexOS SUNNY PORTAL Operating Manual

7 Commissioning

7 Commissioning
7.1

Establishing a direct connection via WLAN

Requirements:
☐ An end device (e.g. computer, tablet PC or smartphone) must be available.
☐ The respective latest version of one of the following web browsers must be installed: Chrome,
Edge, Firefox, Internet Explorer or Safari.
☐ JavaScript must be enabled in the web browser of the end device.
SSID, IP address and WLAN password
• SSID in WLAN: SMA[serial number] (e.g. SMA0123456789)
• Device-specific WLAN password: see WPA2-PSK on the inverter type label or the label
included in delivery
• Standard IP address for a direct connection via WLAN outside of a local network:
192.168.12.3
The procedure can be different depending on the end devices. If the procedure described does not
apply to your end device, establish the direct connection via WLAN as described in the manual of
your end device.
There are two options to connect your end device to the Data Manager via WLAN:
• By entering the WLAN data located on the type label or the label included in delivery into
your end device
• By scanning the QR code on the label included in delivery using your end device
Direct connection by entering the WLAN data
Procedure:
1. Activate the WLAN access point of the Data Manager. For this, tap on the enclosure lid twice.
☑ The COM LED is intermittently flashing orange and green for approx. 5 seconds. The
WLAN access point is then activated for approx. 30 minutes. Once this period has
expired, the WLAN access point is deactivated automatically.
2. Search for WLAN networks with your end device.
3. Select the SSID of the Data Manager SMA[serial number] in the list with the found WLAN
networks.
4. Enter the WLAN (WPA2-PSK) password.
5. Open the web browser of your end device, enter the standard IP address 192.168.12.3 in
the address line of the web browser and press the enter key.
☑ The login page of the user interface opens.
Direct connection by scanning the QR code
Requirements:
☐ A QR code scanner or a corresponding camera function must be available on the end device.
32 EDMM-10-BE-en-20
SMA Solar Technology AG
Operating manual