Supported Products - SMA ennexOS SUNNY PORTAL Operating Manual

SMA Solar Technology AG
2.3

Supported Products

Supported SMA Products
Availability of SMA products in your country
Not all SMA products are available in all countries. For information on whether an SMA
product is available in your country, visit the website of your country's SMA subsidiary
company at www.SMA-Solar.com or contact your distributor.
Inverters:
• All SMA inverters with integrated or retrofitted Speedwire/Webconnect interfaces are
supported. Information on whether an SMA inverter has an integrated Speedwire/
Webconnect interface or can be retrofitted with a Speedwire/Webconnect interface can be
found on the SMA inverter product page at www.SMA-Solar.com.
Other products:
• SMA Com Gateway from firmware version 1.0.28.R
• SMA Energy Meter from firmware version 1.1 (not available in all countries)
• Sunny Portal powered by ennexOS
• 1 SMA Inverter Manager with 1 Sunny Tripower Storage 60
• 1 SMA Inverter Manager with up to 42 Sunny Tripower 60 / Sunny Highpower Peak1
Supported Products from Other Manufacturers
Energy meters:
• Power Analyser of the UMG 604 series from Janitza electronics GmbH
• WattsOn-Mark II Precision Energy Meter from Elkor Technologies Inc.
External I/O Systems:
• ioLogik E1241 of Moxa Europe GmbH (see Section 12 "Accessories", page 51)
• ioLogik E1242 of Moxa Europe GmbH (see Section 12 "Accessories", page 51)
• ioLogik E1260 of Moxa Europe GmbH (see Section 12 "Accessories", page 51)
• WAGO-I/O-SYSTEM 750 of WAGO Kontakttechnik GmbH & Co. KG (see Section 12
"Accessories", page 51)
Sensors (in conjunction with external I/O systems):
• Irradiation sensors that can output a current signal in the range from 4 mA to 20 mA
• Anemometers that can output a current signal in the range from 4 mA to 20 mA
• Temperature sensors with a Pt100 measuring shunt
The linearization of the temperature sensors' data takes place in the I/O system. In the case of solar
irradiation sensors and anemometers, however, the sensor itself must be designed for a
linearization of the data.
Operating manual EDMM-10-BE-en-20
2 Safety
11