Advertisement
Step 2: Add Cover
Slide the Cover (b) so it clips onto the Wall Plate
(a). See Diagram 2 for assistance.
Step 3: Add Feet and Caps
Press fit a Foot (e) into each of the 4 holes in the top
portion of the Tube (c). Press fit a Cap (d) into each
end of the Tube. See Diagram 3 For assistance.
Step 4: Install Tube
Insert the Tube (c) into the Wall Plate (a). Insert a
Set Screw (g) into each hole in the Wall Plate as
shown in the Detailed View of Diagram 4. Tighten
each Set Screw firmly with the Allen Key (h).
Customer Service: 800.359.5520. See complementary Sanus products at www.sanus.com
d
Diagram 4
Sanus Systems 2221 Hwy 36 West, Saint Paul, MN 55113 7.13.05
b
e
c
c
Diagram 2
Diagram 3
Detailed View
g
a
a
Advertisement
