Table of Contents
Advertisement
10.8.2 Configuring automatic switch-off
To do so:
All of the options must be activated (see
1.
Press
twice or hold for 2 seconds.
2.
Select Options. To do so, press
3.
Select Auto Off Time. To do so, press
4.
Select the period of time you want the device to stay switched on (3 minutes,
5 minutes, 10 minutes, 20 minutes, 30 minutes). To do so, press
confirm by pressing
»
The setting has been saved.
5.
Press
to leave the Options menu.
6.
Press
to leave the main menu.
10.9 Calibrating the device
For information on how to calibrate your device, see section
3-point)
calibration".
10.10 Configuring the material calibration function
The type calibration function is described in a separate operating manual.
10.11 Online Send
To do so:
All of the options must be activated (see
1.
Press
twice or hold for 2 seconds.
2.
Select Options. To do so, press
3.
Select Online Send. To do so, press
»
The setting has been saved.
»
The device now automatically sends the stored measured value to the PC each
time the memory button is pressed.
4.
Press
to leave the Options menu.
Page | 43
or
and confirm by pressing
or
.
or
and confirm by pressing
or
"10.5 Activating
options").
and confirm by pressing
"12. 2-point (optionally
"10.5 Activating
options").
and confirm by pressing
.
.
or
and
.
.
Advertisement
Table of Contents
