3.
On receipt of your device
3.1
Taking the device out of its packaging
• Take the device out of its packaging.
• Next, make sure that it is not damaged and that no parts are missing.
3.2
Making sure that all of the components have been included
Make sure that all of the components have been included by checking the package
contents against the following list:
3.2.1
Scope of supply
Three different water activity kit are offered: AW1, AW2 and AW3
Features
Humimeter RH2 (Basic Device)
Water
Activity
Chamber and 2 Sample Cup
(Nalgene Jar)
Certified
Calibration Standards
Thermal Barrier and Grinder
4 Pcs of Alkaline Batteries
Rubber Protection Cover
Plastic Case and Manual
Optional accessories:
• Humimeter USB data interface module – USB Flash drive with software and USB cable
included (Ask for KitB Option while ordering, software available to use with all models AW1,
AW2 and AW3)
• Certified Calibration Standard set of 10 (0.500 or 0.800)
• Sample Jar replacement set with twist off lid for Aw chamber (10 units)
• Battery operated portable thermal printer (only possible together with humimeter
USB data interface module) - Described in a separate operating manual
• Bluetooth module - Described in a separate operating manual
• Wall holder, mounted on humimeter RH2
• Non-Contact IR temperature sensor 10:1 for RH2
• Moisture and temperature sensor with 2 meter connection cable
• Air humidity and temperature sensor (with no connection cable)
Page | 15
AW1
Yes
Measuring
Yes
Yes
NO
NO
Yes
Yes
Yes
AW2
AW3
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
NO
Yes
Yes
Yes
Yes
Yes
Yes
Yes