Table of Contents
Advertisement
Exporting moisture readings from the humimeter RH2
Connect the humimeter RH2 to your computer using the
supplied USB cable.
1.
Insert the USB Mini B connector into the humi-
meter RH2 (figure 49).
2.
Insert the USB connector into the computer.
3.
Open LogMemorizer on your computer.
4.
Switch on the humimeter RH2.
5.
Press
twice or hold for 2 seconds.
6.
Select Send Logs (figure 50). To do so, press
and confirm by pressing
7.
Select Manual Logs or Auto Logs (figure 51). To do
so, press
8.
The display will then show the message Send
(figure 52).
»
All of the measuring values saved on the humi-
meter RH2 will now be sent to your computer.
Initiating the data export at your computer
Connect the humimeter RH2 to your computer using the supplied USB cable.
1.
Insert the USB Mini B connector into the humi-
meter RH2 (figure 53).
2.
Insert the USB connector into the computer.
3.
Open LogMemorizer on your computer.
4.
Switch on the humimeter RH2.
5.
Open the Communication tab in LogMemorizer (figure 54).
Page | 36
.
or
and confirm by pressing
54
49
50
51
or
.
52
53
Advertisement
Table of Contents
