6.2.2
Saving several readings (a measurement series) at the same time
To do so:
The device has to be in the Data Log menu (see
6).
1.
Take several readings (see
2.
To save a reading, press
»
The display will now appear as shown in figure 21.
The marked number shows the number of
readings that have already been saved.
3.
Press
to enter a name for the saved reading
and to finish the measuring process.
»
The display will now appear as shown in figure 22.
4.
The data you have inputted can be overwritten at
any time.
5.
Inputting letters:
Press and hold
required letter and either press it for 3 seconds or
press
to confirm the selected letter (figure 23).
6.
Inputting numbers:
Press and hold
required number and either press it for 3 seconds
or press
7.
Moving forward/back:
Press
to switch to another input level.
Press
or
8.
Confirm your entry by pressing
»
The data you entered has been saved.
Page | 25
"5. The measuring
as soon as the reading has been taken.
to quickly scroll to the
to quickly scroll to the
to confirm the selected number.
to move forward or back.
"Data Log menu" page
process").
21
23
24
.
22