Table of Contents
Advertisement
6.8
Deleting individual values from a single series of measurements
To do so:
You must have saved a series of measurements
comprising at least 2 logs. The display will now appear
as shown in figure 42.
1.
Press
.
2.
Select the required reading. To do so, press
.
»
The display will now appear as shown in figure
3.
Press
to switch to another input level.
»
The display will now appear as shown in figure 44.
4.
Press
.
5.
The display will now appear as shown in figure 45.
6.
Select the required measured value. To do so, press
or
.
7.
Press
to switch to another input level.
»
The display will now appear as shown in figure 46.
8.
Press
to delete the value shown.
»
The display will then show the message clear?
(figure 47).
9.
Confirm by pressing
»
The value has been deleted.
»
Deleted measuring values will be transferred to the
LogMemorizer (see
program") and have to be deleted separately there.
Page | 30
.
"8. Using the LogMemorizer
42
or
43
43.
44
45
46
47
Advertisement
Table of Contents
