Table of Contents
Advertisement
6.2
Saving your readings manually
All of the readings can be saved, edited and viewed on the device. The figure below
shows the overview screen of a single saved series of measurements.
No.
1
2
3
4
5
6
7
8
6.2.1
Saving individual readings
The device can be configured in such a way that the device will save a reading every
time a button is pressed. This option (manual save function) is the device's default set-
ting.
Activating the manual save function in the Options menu
To do so:
The device has to be switched on and be in the product selection menu.
1.
Press
twice or hold for 2 seconds.
2.
Select Options. To do so, press
firm by pressing
3.
Select Log Time. To do so, press
confirm by pressing
4.
Select Manual (figure 17). To do so, press
Page | 23
8
7
6
5
Name
Name of the measurement series (editable)
Temperature (average)
Date & start time of the measurement series
Date & end time of the measurement series
Number of saved readings
Product type
Device name
Water activity (average)
.
.
17
or
and con-
or
and
or
and confirm by pressing
1
2
3
4
.
Advertisement
Table of Contents
