Table of Contents
Advertisement
humimeter FS1 & FS1.1 Operating Manual
8.5
Reducing the device's power consumption
8.5.1
Configuring the display illumination time
To do so:
All of the options must be activated (see
1.
Access the main menu (see
2.
Select Options. To do so, press
3.
Select BL On Time. To do so, press
4.
Select the required display illumination period (30 seconds, 2 minutes, 5 minutes,
10 minutes). To do so, press
»
The setting has been saved.
5.
Press
to leave the Options menu.
6.
Press
to leave the main menu.
8.5.2
Configuring automatic switch-off
To do so:
All of the options must be activated (see
1.
Access the main menu (see
2.
Select Options. To do so, press
3.
Select Auto Off Time. To do so, press
4.
Select the period of time you want the device to stay switched on (3 minutes,
5minutes, 10 minutes). To do so, press
»
The setting has been saved.
5.
Press
to leave the Options menu.
6.
Press
to leave the main menu.
8.6
Configuring the material calibration function
The type calibration function is described in a separate operating manual.
Page 24
"8.2 Activating
"4.3 Accessing the main
or
and confirm by pressing
or
and confirm by pressing
or
and confirm by pressing
"8.2 Activating
"4.3 Accessing the main
or
and confirm by pressing
or
and confirm by pressing
or
options").
menu").
.
options").
menu").
and confirm by pressing
.
.
.
.
.
Advertisement
Table of Contents
