Leica PINMASTER II PRO Instructions Manual page 21

FOREWORD
Dear Customer,
We wish you a great deal of fun and success with your
new Leica product. The Leica Pinmaster II Pro sends
out pulses of laser light, which are in the infrared
wavelength, harmless and invisible to the naked eye;
the built-in microprocessor calculates the object
distance from these reflected signals. The Leica
Pinmaster II Pro is equipped with a first target logic
specially developed for golf and a scanning mode. This
greatly simplifies measuring distances.
The Leica Pinmaster II Pro is equipped with superb
7x-magnification optics, which enable good targeting
even in difficult conditions. Thanks to a ballistics
system specially developed for golf
Compensated Distance") the Pinmaster II Pro will be
your perfect training tool to permanently improve your
game of golf.
In order that you can make full use of all the
possibilities offered by your Pinmaster, we recommend
that you first read these instructions.
TABLE OF CONTENTS
Fitting the carrying cord ................................... 21
Inserting and changing the battery ................... 21
Battery charge state ......................................... 22
Use with and without glasses ........................... 23
Diopter compensation ...................................... 23
Setting the desired unit of measure .................. 24
Distance measurement .................................... 25
Scan mode ...................................................... 25
First target logic ............................................... 26
Measuring range and accuracy ......................... 27
Angle Compensated Distance™ (ACD) ............... 26
Display and checking of the settings ................ 29
Care/cleaning ................................................. 30
(ACD - "Angle Spare parts ...................................................... 30
Troubleshooting ............................................... 31
Technical data ................................................. 32
Leica service addresses ................................... 33
EN
19