Programming Option Bits; Installer's Programming Commands - Bosch ICP-SOL2-P Quick Reference Manual

10 en | Operating Commands
2.3

Programming Option Bits

Use option bits to program any combination of the four different options in one location by
adding the options together. Programming a zero disables all four options.
Example
If at Location 0177 you only want options 1, 2, and 4, add the numbers together and the total
is the number to be programmed. The number to be programmed is 7 (1 + 2 + 4 = 7).
Option
1
2
4
8
Table 2.3: Programming Option Bits
2.4

Installer's programming commands

Installer Programming Commands, displayed in below table can only be used when you enter
Installer's Programming Mode. Enter the command followed by the [#] key.
Command
958
959
960
961
962
963
965
966
999
Table 2.4: Installer's Programming Commands
Bosch Security Systems, Inc.
Description
Dialer reporting functions allowed
Remote arming using Telephone allowed
Answering machine bypass only when armed
Use bell 103 for FSK format (Disabled = CCITT V21)
Description
Exit from Installer's Programming Mode without saving changes
Test IUI-SOL-ADAPTER
Exit from Installer's Programming Mode with saving changes and panel
reset
Reset the control panel to factory defaults
Copy the control panel memory to IUI-SOL-ADAPTER
Copy IUI-SOL-ADAPTER data to the control panel memory
Set up domestic dialing format
Enable/disable the automatic stepping of locations during programming
Display the software version number or control panel type
Quick Reference Guide
Control Panel
2014.06 | 02 | F01U298027