Bosch ICP-SOL2-P Quick Reference Manual page 12

12 en | Operating Commands
Description
Report Monitor Mode
Setting Date and Time
Walk Test Mode
Event Memory Recall
Duress Disarm
Zone Bypass (Zone Isolating)
System Reset
Enter User Menu (text codepad
only)
Enter Programming Menu
Enter User Menu
Exit Menu Without Saving
changes
Codepad Panic Alarm
Codepad Fire Alarm
Codepad Medical Alarm
Speaker Test
Bell Test
Strobe Test (Toggle On/Off)
Day Alarm (Toggle On/Off)
Fault Analysis
Modem Call (A-Link Plus)
Latching Output (Reset)
Display Codepad ID/Change
Codepad Buzzer Tone
Test Report
Table 3.1: Operating Commands
2014.06 | 02 | F01U298027
Command (Default User Code =
2580
Default Inst. Code = 1234)
[Code] + [6] + [#]
[Code] + [6] + [#]
[Code] + [7] + [#]
[Code] + [8] + [#]
[Code] + [9] + [#] or [Code] + [3] +
[#]
[*] + [Code] + [*]
[Code] + [9][9][8][9] + [#]
[Code] + [-]
[Code] + [#] or [Code] + [-]
[-]
Long press [-]
Press [1] and [3] or [*] and [#]
Press [4] and [6]
Press [7] and [9]
Long press [1]
Long press [2]
Long press [3]
Long press [4]
Long press [5]
Long press [6]
Long press [7]
Long press [8]
Long press [9]
Quick Reference Guide
Installer User Code with
Code Authority
Levels
√
√
√ √
√ √
√
√
√
√
√
Bosch Security Systems, Inc.
Control Panel