Philips SpeedPro Max Aqua FC6904/61 Manual page 5

Caution
- Only charge the appliance with the adapter supplied. Only use 18V adapter ZD12D250050 or 25V
adapter ZD12D300050.
- During charging, the adapter becomes warm to the touch. This is normal.
- Do not plug in, unplug or operate the appliance with wet hands.
- Do not remove the adapter from the wall socket by pulling at the cord (Fig. 1). Always unplug the
appliance by first detaching the magnetic connector from the magnetic charging disk (Fig. 2).
- Always switch off the appliance after use and before you charge it.
- Never block the exhaust air openings during vacuuming.
- Do not clean the dust container or the dust container lid in the dishwasher. They are not
dishwasher-proof.
- Do not clean the white material of the filter with a normal vacuum cleaner or a brush to avoid
damage to the material.
- Always use the vacuum cleaner with the filter unit assembled.
- If you clean the washable sponge filter with water, make sure it is completely dry before you put it
back into the filter holder and dust container. Do not dry the sponge filter in direct sunlight, on the
radiator or in the tumble dryer. Do not clean the filter holder with water. This part is not washable.
- Replace a washable sponge filter if it can no longer be cleaned properly or if it is damaged (see
'Ordering accessories').
- Never use any accessories or parts from other manufacturers or that Philips does not specifically
recommend. If you use such accessories or parts, your guarantee becomes invalid.
- Make sure that the temperature in the room where the appliance is stored or charged is between
5°C and 40°C.
- Make sure that the appliance is installed with the wall fixture mounted to the wall according to the
instructions in the user manual.
- Be careful when you drill holes in the wall to attach the wall fixture, to avoid the risk of electric
shock.
- If you use the appliance to vacuum fine sand, lime, cement dust and similar substances, the pores
of the filter will become blocked. Clean the filter regularly.
- As this appliance uses water to clean, the floor may remain wet and slippery for a while (Fig. 3).
- To prevent damage, never put wax, oil, floor maintenance products or liquid floor cleaners that are
not water-dilutable in the water tank.
- Do not mix different types of liquid floor cleaner. When you have used one liquid floor cleaner, first
empty and rinse the water tank before you add another liquid floor cleaner to the water in the
water tank.
- To prevent damage, do not use liquid floor cleaners that are not transparent or even milky.
- Never exceed the maximum quantities mentioned on the bottle when you use a liquid floor
cleaner. Do not add more than a few drops to the water in the water tank, as this tank has a
capacity of 200ml.
- Do not clean the metal wetting strip with a sharp object, as this may damage the strip. Only clean
the wetting strip by rinsing it under the tap. Replace the wetting strip when you can no longer clean
it.
- Replace the wetting strip only with an original strip. For ordering a new strip, see chapter 'Ordering
accessories'.
- Clean the water tank according to the instructions. The water tank is not dishwasher-proof.
- Do not use aggressive cleaning agent or tools to clean the Aqua Boost pedal.
English
7