Storage And Transport; Reception And Check Of Contents; Packing - FPZ SCL TS Series Instructions Manual

with the machine
Use of loose clothing or untied long hair
IMPROPER USE LINKED TO METHODS OF USE
Failure to comply with the
conditions (par. 2.2):
- Ambient temperature outside the limits
or incorrect
- Altitude above 1000 m (3300ft)
- Failure to consider system and filter
pressure losses
Failure to install the filter (for use with
suction in the place)
Operation outside curve (P/Q)
(Pressure /Flow rate)
Rigid connection between the machine and
system
Use of the unit with current values not
corresponding to nominal
IMPROPER USE LINKED TO MAINTENANCE WORK
Failure to clean the filter
Failure to eliminate of layers of surface dust
FAULT CONDITIONS / EMERGENCY CONDITIONS
Not stopping the machine when making an
abnormal noise.
4

STORAGE AND TRANSPORT

4.1

RECEPTION AND CHECK OF CONTENTS

•
Upon receipt of the unit, check that the packaging is intact and without signs of damage
due to transport or storage conditions.
•
If the packaging is damaged, immediately notify the forwarder and the manufacturer.
•
Always check that the material received matches that specified in the consignment note.
4.2

PACKING

Depending on its size and weight, the unit is packed in the following ways:
•
in a single box;
•
on wooden platform with cardboard covering;
•
in a wooden crate;
The wood of the platforms, pallets and crates can be reused or recycled in accordance with the current
laws in the country where the unit is installed. Other materials, such as cardboard, plastic or protective film,
must be disposed of in accordance with local regulations.
FPZ-MI-K TS-MOR-USA-15-R03
of the machine
Possible catching or suction in the machine
or in the motor fan
operating Machine performance different from the data
given, possible motor faults and seizing of
the impeller
Particles entering the blower with seizing of
the impeller
Machine performance different from the data
given, possible motor faults and seizing of
the impeller
Abnormal vibrations for the machine and/or
system with possible seizing of the impeller.
Possible overheating of the machine and
motor when powered by an inverter.
Seizing of the impeller
Machine overheating
Damage with possible seizing of
impeller, machine overheating and possible
motor damage.
16 / 79
RISK FOR THE OPERATOR
RISK FOR THE MACHINE
RISK FOR THE MACHINE
RISK FOR THE MACHINE, SYSTEMS
AND OPERATORS
RISK FOR THE MACHINE, SYSTEMS
AND OPERATORS
RISK FOR THE MACHINE
RISK FOR THE MACHINE
RISK FOR THE MACHINE, SYSTEMS
AND OPERATORS
the RISK FOR THE MACHINE, SYSTEMS
AND OPERATORS