Uploading A File From Compact Flash To The Network - Avaya Advanced Gateway 2330 Manual

File management
file download <source-host-ip> <source-dirpath/filename> {/cf0/
<filename> | /cf1/<filename>} [interface <interface>] [id
<user-id>] [passwd <passwd>] [mode <mode>]
Table 8: Variable definitions
<source-host-ip>
<source-dirpath/filename>
{/cf0/<filename> | /cf1/<filename>}
interface <interface>
id <user-id>
passwd <passwd>
mode <mode>

Uploading a file from compact flash to the network

Upload a file from compact flash to a remote host. You can transfer the file using either TFTP
or FTP. If you use this command with an FTP server, you must specify the FTP user ID and
password for authentication.
To upload a file from compact flash, enter:
file upload {/cf0/<filename> | /cf1/<filename>} <dest-host-ip>
<dest-path/filename> [<outgoing-interface>] [<user-id>]
[<password>]
Table 9: Variable definitions
<dest-host-ip>
<dest-path/filename>
{/cf0/<filename> | /cf1/<filename>}
[<outgoing-interface>]
[<user-id>]
32 Using the Command Line Interface
Variable
Variable
Comments? infodev@avaya.com
Value
Specifies the source host (server) IP or IPv6
address.
Specifies the path name of the source file.
Specifies the location and name of the file
destination.
Specifies the outgoing interface.
Specifies the user ID.
Specifies the user password.
Specifies the download mode (image, or file
for non-image). The default is file.
Value
Specifies the destination host (server) IP or
IPv6 address.
Specifies the destination path name for the
file.
Specifies the source filename to be
uploaded.
Specifies the outgoing interface.
Specifies the FTP user ID.
August 2013