Polaris Slingshot SL 2020 Owner's Manual page 77

5. If either the check engine indicator or the low oil pressure indicator
illuminates after the engine starts, stop the engine immediately. Refer to
either the check engine indicator information or the low oil pressure indicator
information. See the Indicator Lamps section for details.
6. Allow the engine to idle. Idle speed will gradually slow to normal as the
engine warms to operating temperature.
7. Release the park brake before operation.
AUTODRIVE TRANSMISSION VEHICLES
1. Perform the steps outlined in the Pre-Ride Inspection section.
2. Apply the brake pedal.
3. With the brake applied, press the engine start/stop button
engine. Do not push the throttle pedal.
You may hear a whining noise when starting a vehicle equipped with
AutoDrive. This is normal operation. You may see the message "Wait for Pump
Priming" on the display screen and the Start/Stop button flash white. Once the
Start/Stop button turns green, the engine is ready to start. This may take longer
in colder weather or if your vehicle hasn't been operated for extended periods.
4. If either the check engine indicator or the low oil pressure indicator
illuminates after the engine starts, stop the engine immediately. Refer to
either the check engine indicator information or the low oil pressure indicator
information. See the Indicator Lamps section for details.
NOTICE
OPERATION
q
to start the
75