MAINTENANCE
FLUID CHANGE
1. Elevate the vehicle using appropriate jack stands. Make sure the elevated
vehicle is level.
2. Remove the fill plug
3. Place a drain pan under the drain plug
4. Remove the drain plug. Allow the fluid to drain completely.
5. Clean and reinstall the drain plug. Torque to specification.
Use a syringe to add the fluid. If a syringe is not available, use a funnel and
6. Add the recommended fluid. Do not overfill. Maintain the fluid level at the
bottom edge of the fill hole.
108
q
.
TORQUE
10-14 ft-lbs (14-19 Nm)
NOTICE
tube to add the fluid.
FLUID CAPACITY
25.4 oz (750 ml)
w
.