Polaris Slingshot SL 2020 Owner's Manual page 34

FEATURES AND CONTROLS
LAMP INDICATES
Low Battery
Voltage
Traction
Control
ESP Disabled
ESP
Intervention
Brake Failure
Seat Belt
Pinion-
Assisted
Electric Power
Steering
Warning
Park Brake
Engaged
Low Oil
Pressure
32
fault condition exists. Retrieve the error codes for
diagnosis. See the Error Codes section for details. This
lamp is also known as a malfunction indicator lamp (MIL).
This lamp illuminates when battery voltage is low (or when
voltage is above the normal range). Turn non-essential
accessories off to conserve power. Make sure the charging
system is operating properly.
This lamp illuminates if the user disables traction control
with the ESP Switch. See page 27.
This lamp illuminates if the user disables the ESP with the
ESP Switch. Always enable the ESP for normal operation.
See page 27.
The ESP intervention lamp flashes when the ESP is
actively assisting. The lamp illuminates solid to indicate a
system fault and the ESP will be disabled. If the lamp
illuminates solid, your dealer can inspect the vehicle and
perform service.
This lamp illuminates if a brake component is not operating
properly. Do not operate the vehicle. Inspect brake fluid
levels. Your dealer can inspect the vehicle and perform
service.
The seat belt lamp illuminates whenever the vehicle is in
ignition state and the driver's seat belt is not fastened.
This lamp illuminates briefly when the vehicle is in ignition
state. If ignition state is activated for 5 minutes without
starting the engine, the lamp illuminates to indicate that the
PEPS has shut down to conserve battery power. If the lamp
illuminates after starting the engine, the power steering
system is inoperative. Your dealer can inspect the vehicle
and perform service if the lamp illuminates after starting the
engine.
This lamp illuminates when the park brake is engaged. If it
illuminates when the park brake is NOT engaged, your
dealer can inspect the vehicle and perform service
This lamp illuminates if engine oil pressure drops below
safe operating pressure. If this lamp illuminates while the
engine is running, turn the engine off as soon as safely
CONDITION