Analog Input Module (Aim) 6Dr4004-6F / -8F - Siemens SIPART PS2 6DR5 Series Compact Operating Instructions

Technical data
7.4 Option modules
● Static destruction limit
● Connecting to circuits with the
following peak values
Effective internal capacitance
Effective internal inductance
Galvanic isolation
Test voltage
7.4.2

Analog Input Module (AIM) 6DR4004-6F / -8F

The Analog Input Module (AIM) 6DR4004-6F and -8F is required to connect a Non Contacting Sensor (NCS) or External
For devices without explosion protection, other types of potentiometers with resistance values between 3 and 20 KΩ can be
R-potentiometer
● Peak values when supplied by other
basic devices (6DR50/1/2/3/9)
● Maximum values when powered by the
base unit with PA (6DR55) or FF
communication (6DR56)
Signal 20 mA
● Rated signal range
● Internal load R
B
● Static destruction limit
Signal 10 V
● Rated signal range
● Internal resistance R
i
● Static destruction limit
Supply and signal power circuits
72
Without explosion protec‐
tion or suitable for use in
Ex "db" version
6DR4004-8A
± 35 V
-
-
-
The three outputs, the BI2 input and the basic device are galvanically isolated from
Without explosion
protection
6DR4004-8F
Position Transmitter 6DR4004-1ES to -4ES.
connected.
U = 5 V
max
U = 5 V
max
0 ... 20 mA
200 Ω
40 mA
0 ... 10 V
25 kΩ
20 V
Galvanically connected with the basic device
With explosion protection
Ex "ia"
6DR4004-6A
-
U = DC 25.2 V
i
C = negligibly small
i
L = negligibly small
i
each other.
DC 840 V, 1 s
With explosion protection
Ex "ia", "ic"
6DR4004-6F
U = 5 V
o
I = 100 mA
o
P = 33 mW
o
C = 1 μF
o
L = 1 mH
o
U = 5 V
o
I = 75 mA static
o
I = 160 mA transient
o
P = 120 mW
o
C = 1 μF
o
L = 1 mH
o
Compact Operating Instructions, 09/2019, A5E03436620-AE
With explosion protection
Ex "ic", "ec", "tb"
6DR4004-6A
-
"ic":
U = DC 25.2 V
i
"ec"/"tb":
U ≤ DC 25.2 V
n
C = negligibly small
i
L = negligibly small
i
With explosion protection
Ex "ec", "tb"
6DR4004-6F
U = 5 V
max
U = 5 V
max
-
-
-
-
-
-
SIPART PS2 (6DR5...)