M12 Connector In Basic Device With Inductive Limit Switches (Ils) 6Dr4004-6G /-8G Z D56) - Siemens SIPART PS2 6DR5 Series Compact Operating Instructions

Connecting
4.3 Pneumatic connection
4.2.6.7 M12 Connector in Basic Device with Inductive Limit Switches (ILS) 6DR4004-6G /-8G (-
Z D56)
You have a positioner with order suffix -Z order code D56. In this version of the positioner, the
outputs of Inductive Limit Switches (ILS) are electrically connected to the M12 connector.
Table 4-7
Alarm output terminal
41 (+)
52 (-)
42 (-)
51 (+)
4.2.6.8 M12 Connector in Basic Device with Mechanic Limit Switches (MLS) 6DR4004-6K (-Z
D57)
You have a positioner with order suffix -Z order code D57. In this version of the positioner, the
outputs of Mechanic Limit Switches (MLS) are electrically connected to the M12 connector.
Table 4-8
Alarm output terminal
41 (+)
52 (-)
42 (-)
51 (+)
4.3 Pneumatic connection
Pneumatic auxiliary power
For safety reasons, the pneumatic auxiliary power supply can be fed after installation only if
the positioner is switched to "P-Manual mode" when an electrical signal is present. This
operating mode is preset in the delivery state.
Note
Specifications regarding air quality
Observe the specifications regarding the air quality, see section "Technical specifications
> Pneumatic data (Page 58)".
36
Assignment diagram
Assignment diagram
WARNING
Pole designation
1 - Brown
4 - Black
3 - Blue
2 - White
Pole designation
1 - Brown
4 - Black
3 - Blue
2 - White
Compact Operating Instructions, 09/2019, A5E03436620-AE
SIPART PS2 (6DR5...)