Mahindra Genio DC BS-III Diagnostic Manual page 86

Diagnostic Manual (EMS)
Genio DC BS-III & BS-IV
Rail Pressure Deviation
DTC
P1196
DTC detection condition
Proper Performance
The rail pressure is within limit
Malfunction; out-of-range
If rail pressure exceeds the limits specified in the map
then the error is generated
Reaction
• The engine is switched off.
• System Check lamp is ON
All copyrights reserved by
The repair methods given by the manufacturer in this document are based on the technical specifications, current at the time of release. The methods may be modified as a result of changes
introduced by the manufacturer in the production of the various component units and accessories from which the vehicles are manufactured. The reproduction, translation, transmission, in part of or
whole of the present document, are prohibited without the prior written consent of Mahindra & Mahindra Ltd.
at the Authorized Service Centre of Mahindra & Mahindra Ltd., will amount to unauthorized use and shall be liable for penalty/prosecution© 2010 Mahindra &
Mahindra Ltd.
Diagnostic item
Maximum rail pressure exceeded
The use of this document by any person other than the trained personnel,
MAN-00139-86
August 2011/Rev 1
P1196
Probable cause
Possible Causes
Metering unit is stuck in
open position,
Metering unit without
power due to electrical
error