Mahindra Genio DC BS-III Diagnostic Manual page 9

Diagnostic Manual (EMS)
Genio DC BS-III & BS-IV
Notes –
1. Ensure that the there is no communication breakdown once the flashing begins.
Check Python connections are secure.
2. Ensure that the SMART tester has -
• Enough battery reserve/Connected to AC power
• Screen saver/Battery saver mode turned off,
• Vehicle's ignition is ON
• Battery terminals connected securely.
• Battery earth connection is good.
3. Never touch the ECU pins by hand/finger.
RE-PROGRAMMING PROCEDURE
• Connect using the "Python1BConfig0404".
• Open EDC17C55 Field flashing tool icon present on the desk top
• The following window will appear
All copyrights reserved by
The repair methods given by the manufacturer in this document are based on the technical specifications, current at the time of release. The methods may be modified as a result of changes
introduced by the manufacturer in the production of the various component units and accessories from which the vehicles are manufactured. The reproduction, translation, transmission, in part of or
whole of the present document, are prohibited without the prior written consent of Mahindra & Mahindra Ltd.
at the Authorized Service Centre of Mahindra & Mahindra Ltd., will amount to unauthorized use and shall be liable for penalty/prosecution© 2010 Mahindra &
Mahindra Ltd.
MAN-00139-9
August 2011/Rev 1
The use of this document by any person other than the trained personnel,