Mahindra Genio DC BS-III Diagnostic Manual page 151

Diagnostic Manual (EMS)
Genio DC BS-III & BS-IV
Trouble Shooting
1. Check the wire from EMS94 to fan relay point 3 for insulation damage/short to any
other wires. Replace the wiring if necessary.
2. If wiring is found ok, replace the relay and confirm the error is cleared.
All copyrights reserved by
The repair methods given by the manufacturer in this document are based on the technical specifications, current at the time of release. The methods may be modified as a result of changes
introduced by the manufacturer in the production of the various component units and accessories from which the vehicles are manufactured. The reproduction, translation, transmission, in part of or
whole of the present document, are prohibited without the prior written consent of Mahindra & Mahindra Ltd.
at the Authorized Service Centre of Mahindra & Mahindra Ltd., will amount to unauthorized use and shall be liable for penalty/prosecution© 2010 Mahindra &
Mahindra Ltd.
MAN-00139-151
August 2011/Rev 1
The use of this document by any person other than the trained personnel,
P1530