Mahindra Genio DC BS-III Diagnostic Manual page 105

Diagnostic Manual (EMS)
Genio DC BS-III & BS-IV
Trouble Shooting
1. Check for proper connection of connectors.
2. Check for any pin bent/back out/oxidation.
3. If all the above checks are ok, replace the EMS with the prior approval from
TEKliner.
All copyrights reserved by
The repair methods given by the manufacturer in this document are based on the technical specifications, current at the time of release. The methods may be modified as a result of changes
introduced by the manufacturer in the production of the various component units and accessories from which the vehicles are manufactured. The reproduction, translation, transmission, in part of or
whole of the present document, are prohibited without the prior written consent of Mahindra & Mahindra Ltd.
at the Authorized Service Centre of Mahindra & Mahindra Ltd., will amount to unauthorized use and shall be liable for penalty/prosecution© 2010 Mahindra &
Mahindra Ltd.
MAN-00139-105
August 2011/Rev 1
The use of this document by any person other than the trained personnel,
P1657