Service And Maintenance; Changing The Vaporizer; Removal Of The Vaporizer; Installation Of The Vaporizer - Look Solutions TINY S Operating Manual

Table of Contents

The micro vaporizer especially developed for the Tiny S has a limited working life.

Depending on application duration, the fogging output will reduce after a while and

the vaporizer will need to be changed.

a) Separate the Tiny S from the battery. To remove the battery, press it slightly into

the slot, rotate it anti-clockwise and withdraw it.

b) Unscrew the four screws [3] with a suitable screwdriver to release the stainless steel

hood.

c) Remove the stainless steel hood.

d) Unscrew the two screws [6] at the vaporizer with a suitable screwdriver.

e) Slide out the vaporizer [7] forwards.

f) Remove the fluid tube [8] from the tubing spout [9] of the vaporizer. If the tubing

does not come off, you can pull on it with a pair of small pliers or a similar tool.

g) Clean the interior of the unit with an absorbant, fluff-free cloth.

a) Plug the fluid tube [8] onto tubing spout [9] of the new vaporizer.

b) Mount the new vaporizer to the connecting pins [10] with the two screws [6] .

c) Check the connections and make sure that the fluid tubing is not twisted or bent.

d) Mount the stainless steel hood with the four screws [3] at the machines cover. Ensure

that the hood engages into the corresponding guide groove of the lid part.

7. Service and Maintenance

Table of Contents