Loading The Tool - U-Line H-1028 Manual

PHONE 1-800-295-5510
1. Disconnect the air supply.
2. Pull the Pusher back until it stops on pusher pivots. Rotate pusher to
position.
3. Insert 2 sticks of appropriate staples into the magazine. Let the sticks slide
forward to the front of the magazine.
4. Pull the pusher back to an upright position and gently let the pusher slide
forward against the staples. Do not let the pusher slide forward and strike
the staples at high speed as this may deform the staples and damage the
tool.
Back to Top
CHICAGO MINNEAPOLIS
•
FAX 1-800-295-5571

Loading the Tool

LOS ANGELES NYC/PHILA
• •
WEB uline.com
ATLANTA DALLAS
• •