Unmapped Indications; All Premapped Three-Phase Protection Function Stages, Start And Operate/Phase-Dependent Objects Added; Common Data 2 - ABB RELION 611 Series Modbus Point List Manual

1MRS757464 C
2.3.2
2.3.2.1
Table 36:

All premapped three-phase protection function stages, start and operate/phase-dependent objects added

BitA RegA
2.3.2.2
Table 37:

Common data 2

BitA RegA
Table continues on next page
REM611
Point List Manual

Unmapped indications

Unmapped indications are indication data that have no initial Modbus mapping
locations, but can be added to the user-definable Modbus area using the
Communication Management tool in PCM600. If Modbus events are enabled for
these indication signals, the event identification is the user-definable area address.
All premapped three-phase protection function stages, start and
operate/phase-dependent objects added
IEC 61850 name SA name
LD0.xxxxxxxx (various)
.Op.phsA
.mcd
.Str.phsA
.mcd
.Op.phsB
.mcd
.Str.phsB
.mcd
.Op.phsC
.mcd
.Str.phsC
.mcd
Common data 2
IEC 61850 name SA name
LD0.LDEV1
.DevFail.stVal
.mcd
.StLstOv.stVal
.mcd
.MeasLstOv.stVal
.mcd
.ChgFlg.stVal
.mcd
.FacSet.stVal
.mcd
Modbus data mappings
Description
Operate Phase A
Start Phase A
Operate Phase B
Start Phase B
Operate Phase C
Start Phase C
Description
Internal fault
Internal ind. overflow
Internal meas. overflow
Configuration changed
Factory settings in use
Section 2
Values
1 = Operate
1 = Start
1 = Operate
1 = Start
1 = Operate
1 = Start
Values
1=Fault
1=Overflow
1=Overflow
1=Changed
1=In use
25