Unmapped Indications; All Premapped Three-Phase Protection Function Stages, Start And Operate/Phase-Dependent Objects Added; Common Data 2 - ABB RELION 611 Series Modbus Point List Manual

Section 2
Modbus data mappings
2.3.2
2.3.2.1
Table 37:

All premapped three-phase protection function stages, start and operate/phase-dependent objects added

BitA RegA
2.3.2.2
Table 38:

Common data 2

BitA RegA
Table continues on next page
26

Unmapped indications

Unmapped indications are indication data that have no initial Modbus mapping
locations, but can be added to the user-definable Modbus area using the
Communication Management tool in PCM600. If Modbus events are enabled for
these indication signals, the event identification is the user-definable area address.
All premapped three-phase protection function stages, start and
operate/phase-dependent objects added
IEC 61850 name SA name
LD0.xxxxxxxx (various)
.Op.phsA
.mcd
.Str.phsA
.mcd
.Op.phsB
.mcd
.Str.phsB
.mcd
.Op.phsC
.mcd
.Str.phsC
.mcd
Common data 2
IEC 61850 name SA name
LD0.LDEV1
.DevFail.stVal
.mcd
.StLstOv.stVal
.mcd
.MeasLstOv.stVal
.mcd
.ChgFlg.stVal
.mcd
.FacSet.stVal
.mcd
Description
Operate Phase A
Start Phase A
Operate Phase B
Start Phase B
Operate Phase C
Start Phase C
Description
Internal fault
Internal ind. overflow
Internal meas. overflow
Configuration changed
Factory settings in use
1MRS758336 B
Values
1 = Operate
1 = Start
1 = Operate
1 = Start
1 = Operate
1 = Start
Values
1=Fault
1=Overflow
1=Overflow
1=Changed
1=In use
REU611
Point List Manual