Indications - ABB RELION 611 Series Modbus Point List Manual

Section 2
Modbus data mappings
2.3
12
Function
Runtime counter for machines and devices
Logging
Disturbance recorder
Fault recorder
Measurement
Three-phase current measurement
Sequence current measurement
Residual current measurement
Other
Input switch group
Output switch group
Selector
Minimum pulse timer (2 pcs)
Minimum pulse timer (2 pcs, second resolution)
Move (8 pcs)
1, 2, ... = Number of included instances. The instances of a protection function represent the number of
identical protection function blocks available in the standardized configuration.
() = optional
1) Io selectable by parameter and default value is "Io measured"

Indications

Table 3: Explanations of the indications table columns
Column name Description
BitA Default 0X and 1X bit address for the data.
RegA Default 3X and 4X register.bit (00-15) address for the data.
IEC 61850 Original IED data object identification. Described in the IEC 61850 format as Logical
name Device.Logical Node and thereafter .Data Object.Data Attribute. Logical Node is the
same as the application function block name.
SA name The signal may have a defined label that is visible, for example, in the Application
Configuration tool in PCM600.
Description Short description of the signal. See the technical manual for more information.
Value Meaning of the value states.
1MRS757464 C
IEC 61850 A
ME/C101
MDSOPT 1
RDRE 1
FLTRFRC 1
CMMXU 1
CSMSQI 1
RESCMMXU 1
ISWGAPC 10
OSWGAPC 20
SELGAPC 6
TPGAPC 10
TPSGAPC 1
MVGAPC 1
REM611
Point List Manual